The 2KT systems consist of two chambers located one above the other. The polymer solution is prepared and matured in the upper chamber. If required, the motorised flap opens and discharges the matured solution into the dosing container below, from which it can be continuously dosed.
Small space requirement due to compact shape (two chambers on top of each other)
Two separate containers prevent short-circuit currents
Energy-saving, as only one agitator is required
Flow diagram
For enquiries about our products, please contact us at: office@eurodos.at
Details/designs and special services
2 separate chambers made of PP (preparation, maturing and dosing chamber) with stainless steel electric agitator and level measurement
Stainless steel dry material feeder with dosing screw
Water equipment: PVC pipework, water line with shut-off valve, pressure reducer, solenoid valve and contact water meter
Nozzle mixer with dissolving water connection and additional connection for liquid polymer dosing
Control cabinet with PLC and operating display for settings and operation
Solution concentration freely adjustable from 0.05 to 0.5 % (optionally 1 %) at a maximum viscosity of 2,500 cP
Maturation time depends on the throughput rate
Process water: technically pure, min. 3 bar
